Learn How To Read a Ruler
Learn how to read a ruler or read a tape measure easily with just basic information. Begin with just using the inch scale of the half inch lines on a standard ruler. However, if you are measuring different things accurately then, you must learn how to use all of the marks on these rulers. You will need to know the marks on a ruler that show the quarter inch, the eighth inch and sixteenth inch intervals. You will be able to easily read a ruler once you learn to read the marks on a ruler.
The basic skill that you must know when reading a ruler is to learn what are the marks on a ruler. Familiarize yourself each line is the first step when learning how to read a ruler.
A standard ruler has 12 distinctive marks. These line marks are the inch line markings. Between these inch line marks you will find line markings that vary in length.
The second longest marking is the half inch line marking. Standard rulers have line markings which are between the inch line marking and the half inch line marking. The ruler you are using should have these line markings. If not then the ruler you are using is not a standard ruler. Here, you must have a standard ruler.
To learn how to read a ruler, you must use a standard ruler. Now, check out the third longest line markings. These line marking are the quarter of an inch lines. The fourth longest line marking is the eighth inch and the last line marking in a standard ruler is the sixteenth of an inch. Get familiar with these markings to get good measurements every time you use a ruler.
How To Read A Ruler With Fractions
A skill that you will need to read a ruler is to know how to add fractions. If you take a measurement and the line shows the length is past the one inch line, past the quarter inch line to the eighth inch line, you need to calculate. What you need to do is to note the one inch and convert the other lengths into fractions of 16. So you have one inch and 4/16 and a 2/16. You will then add the fraction and note the inch. The accurate measurement of the length that you have taken up is 1 and 6/16 inches. But, if the lines or marks on the ruler are specific, meaning they count measurement as you go along, then it is easier.
The ruler scale will state what lines mean what. So, you go to the inch mark and read the line which tells you what count is left over. I hope that you learn how to read a ruler with this help.